Omnitron Systems Technology9330-1-11W - OmniConverter FPoE+/S 10/100 PoE+ to 100 SM/SC/SF Tx1310/Rx1550/20km AC Power Wide

The OmniConverter FPoE/SL FPoE/S and FPoE+/S are multi-port media converters that convert 10/100BASE-T copper to 100BASE-X fiber and support Power-over-Ethernet (PoE and PoE+). Classified as Power Sourcing Equipment (PSE) they provide power to one or two Powered Devices (PDs) using standard UTP cables that carry the Ethernet data. The OmniConverter FPoE/SL is a cost-effective media converter that provides up to 15.40W PoE (IEEE 802.3af) per RJ-45 port and supports frame sizes up to 2000 bytes. The OmniConverter FPoE/S provides up to 15.40W PoE (IEEE 802.3af) per RJ-45 port and supports frame sizes up to 10240 bytes. The OmniConverter FPoE+/S provides up to 34.20W PoE+ (IEEE 802.3at) per RJ-45 port and supports frame sizes up to 10240 bytes. The FPoE+/S powers the more demanding PDs such as outdoor PTZ (pan-tilt-zoom) cameras and mutli-band multi-stream wireless WiFi access points. Models with two fiber ports support redundant fiber uplinks for critical applications that require protection and sub 50ms restoration in the event of a fiber failure. The second fiber port may also be used to cascade multiple media converters or it may be used as another switch port. Configurable features include link modes and a PoE power reset function that enables a PD device to be re-initialized remotely. When a problem with a PD is identified the fiber port on a managed switch can be shut down or disconnected enabling the PoE power reset function on the OmniConverter. The PoE power to the PD is disabled for 2 seconds when a loss of receive fiber link is detected by the OmniConverter eliminating the need for costly truck rolls to remote PD sites. Link modes can be configured to propagate loss-of-link faults to managed devices immediately notifying administrators of network outages. OmniConverter media converters support fixed-fiber connectors and Small Form Pluggable (SFP) transceivers enabling easy adaptability to different fiber types distances and wavelengths. They support multimode and single-mode dual fiber; and single-mode single-fiber in standard and CWDM wavelengths. The compact standalone OmniConverter media converters can be tabletop mounted wall mounted or DIN-rail mounted using an optional DIN-rail mounting kit. They can also be mounted on a 1U 19" rack-mount shelf. They are available with DC power input via terminal connectors or external 100 to 240V AC power adapters.